|
Thermal Wire Stripper PTS-50 /60 Series
PVC Insulation
- AC line or battery powered
- Fast, small, portable
- Safe to use
- No wire or shield nicking
- Coaxial type cables
- Hand Held
- Low cost
PTS-50: The Thermal Wire
Stripper Model PTS-50 is a low power line operated
tool, which far surpasses all previous devices in safety,
versatility, speed and economy. The patented design
incorporates a uniquely shaped nichrome heating element, which
heats up quickly (less than 5 seconds) to an optimal temperature
of approximately 450° F and efficiently
strips coaxial type cables such as RG-58, RG-59, RG-62 etc. The
smooth design and low mass element minimizes the risk of burns and
eliminates nicks and broken strands of conductors. This
comfortably sized handheld tool operates on 120 VAC, 50/60 Hz,
with power consumption of only 8 watts.
Different line voltages available
on special orders.
SPECIFICATIONS: Model PTS-50
Dimensions: 5.2 in.(132mm.) x 2.25 in.(57mm.) x 2 in.
(51 mm.)
Weight: 1 lb. (.453 kg.)
To purchase the Thermal Wire Stripper PTS-50 model, please click on the purchase
button below:
***************************************************************************
PTS-60: The same as the Thermal Wire Stripper PTS-50 except powered by a
rechargeable battery. Designed for technicians and
servicemen for field operation without access to line power.
Each unit includes a battery and charger and can produce over
1,200
strips on a full charge.
SPECIFICATIONS: Models PTS-60
Dimensions: 5.2 in. (132mm.) x 2.25 in.(57mm.) x 2 in.
(51 mm.)
Weight: 10 ounces (.28 kg.) including battery
Battery: NiMH 1.2 Volts, Single D cell. 9Ahr.
BATTERY CHARGER :
Dimensions: 2.27 in.(58 mm.) x 1.89 in.(48 mm.) x 2.12
in. (54 mm.)
Weight: 6 ounces (.17kg.)
Input: 120 VAC 50/60 Hz, 2.8 W
Output: 1.45 VDC 400mA.
To purchase the Thermal Wire Stripper PTS-60 model, please click on the purchase
button below:
|
