PTS-10/100 THERMAL WIRE STRIPPER STEP BY STEP OPERATION
Use this method to strip short pieces of wire. For higher production, the thermal wire stripper can be temporarily table mounted using double stick tape for two hands operation.
(STEP-1)
Align the wire with the largest opening in the element.
(STEP-2)
Insert the wire as far as required using visual judgment or adjustable wire stop.
(STEP-3)
Move the wire towards the tapered end of the stripping element, applying pressure until resistance is felt
(STEP-4)
Rotate the wire 1/4 turn maintaining slight pressure into the “V”, so the insulation is completely separated.
(STEP-5)
Without releasing the slight side pressure, pull the wire away from the element.
(STEP-6)
This will remove the insulation slug without any damage to the conductor.